Job Responsibilities
1. In charge of motor electromagnetic design and electromagnetic field simulation analysis.
2. Optimize design scheme to improve motor performance and efficiency.
3. Participate in new motor R&D, formulate electromagnetic design scheme and complete design verification.
4. Conduct technical improvement and cost optimization for existing motor products.

-Job Requirements
1. Bachelor degree or above, major in electromagnetic field & motor related disciplines.
2. Familiar with motor electromagnetic design principles and tools (ANSYS, MATLAB, etc.).
3. Solid motor theoretical foundation and practical design experience.
4. Strong innovation & learning ability, able to solve electromagnetic design technical problems independently.

Job Responsibilities
1. Responsible for product software R&D and participate in embedded system solution formulation.
2. Analyze project requirements, study technical details and conduct technical pre-research.
3. Develop driver codes for functional modules per coding specifications and R&D schedule.
4. Complete detailed design, coding and unit testing of software modules.
5. Assist hardware engineers in compiling specifications to meet design requirements.

-Job Requirements
1. College degree or above, major in electronics, communication, automation, computer or related.
2. Familiar with embedded software development, master 8-bit & 32-bit MCU application.
3. 5+ years automotive electronic software development experience.
4. Familiar with Bootloader / UDS diagnostic development is preferred.
5. Able to read circuit diagrams; experience in NXP S32K142 OTA (rollback & dual partition) development is preferred.
6. Familiar with ASPICE is preferred.

Job Responsibilities
1. Responsible for injection mold design, data analysis and mold PPAP submission.
2. Complete mold budget & quotation, evaluate production scheme and cost to ensure low-cost, short-cycle and high-quality mold development.
3. Research and innovate new mold technologies.
4. Participate in APQP cross-functional quality planning.
5. Organize and participate in DFMEA & PFMEA compilation and review.
6. Promote mold design standardization.

-Job Requirements
1. College degree or above, major in mold & mechanical engineering.
2. 5+ years experience in precision insert molding design for switches.
3. Proficient in UG / Pro-E / CAD.
4. Strong sense of responsibility, proactive and good communication skills.

Job Responsibilities
1. Develop suppliers for US automotive aftermarket (interior & exterior modification parts).
2. Control procurement cost and supply chain, promote cost reduction projects.
3. Identify supply & cost risks, early warning and follow-up to avoid production shutdown loss.
4. Maintain supplier relationship, optimize supplier performance and eliminate unqualified vendors.
5. Negotiate, sign and update supplier contracts to avoid legal risks.

-Job Requirements
1. Excellent English for business negotiation and daily communication.
2. Familiar with international trade rules and processes.
3. Strong supplier development ability and cost awareness.
4. Good coordination, teamwork and conflict management skills.
5. Overseas procurement experience preferred; able to take long-term business trips.

Job Responsibilities
1. Conduct quality planning for new products, new processes and new equipment in accordance with APQP requirements.
2. Review customer input requirements and Toneluck design outputs, including product design, process design and equipment design.
3. Review DFMEA and PFMEA documents.
4. Plan the budget for inspection and testing fixtures.
5. Develop control plans.
6. Review and approve supplier PPAP submissions.
7. Implement MSA for new measurement systems.
8. Conduct process capability analysis for new products, new processes and new equipment.
9. Control and monitor product quality during prototype and pilot production phases.
10. Provide technical and quality support to production.
11.Stop production in the event of non-conformities in products and processes.
12. Submit PPAP documents to customers.
13. Handle customer complaints regarding new products.

-Job Requirements
1. Bachelor’s degree, majoring in Mechanical Engineering or Quality Management.
2. Proficient in 8D, 5-Why, FMEA, CP, MSA, VDA 6.3, IATF 16949 and other quality management tools and standards.
3. Knowledge of Six Sigma and project management is preferred.
4. Possess strong communication, negotiation and conflict resolution skills.
5. Familiar with and able to apply statistical techniques such as SPC.
6. Ability to read engineering drawings and adopt innovative methods for problem solving.
7. 3–5 years of quality engineering working experience in the automotive industry; with relevant motor professional knowledge. Experience covering injection molding, stamping, assembly and automation is preferred.
8. Hands-on experience in customer complaint handling.
9. Excellent teamwork skills.

Job Responsibilities
1. Take charge of automotive component project development for foreign customers.
2. Assess project risks, formulate project plan and lead the team to deliver targets.
3. Assist project director in internal R&D project management.

-Job Requirements
1. Bachelor degree or above, science & engineering major.
2. 8+ years project management experience, automotive industry background preferred.
3. Familiar with TS16949, fluent in English for foreign customer communication.
4. Independent delivery experience of large complex projects, strong coordination & pressure resistance.

Job Responsibilities
1. Conduct stamping mold design, data analysis and mold PPAP submission.
2. Responsible for mold budget and quotation; evaluate production feasibility and cost assessment to develop high-quality, cost-effective and short-cycle stamping molds.
3. Research and innovate new hardware mold technologies.
4. Participate in APQP cross-functional quality planning for new products.
5. Organize and participate in DFMEA and PFMEA development.
6. Standardize hardware mold design management.

-Job Requirements
1. College degree or above, majoring in Mold or Mechanical Engineering.
2. 5+ years of relevant working experience; experience in mold design for automotive connector terminals and switch shrapnel is preferred.
3. Solid professional knowledge and practical experience; familiar with mold processing technology and structure.
4. Familiar with ISO9001 and TS16949 quality systems.
5. Proficient in PRO-E, UG and AutoCAD software.

Job Responsibilities
1. Production Management: Overall manage stamping workshop production, optimize process, improve OEE and yield.
2. Equipment & Mold Management: Full life cycle management of stamping equipment and molds, solve on-site mold & equipment abnormalities.
3. Quality & EHS: Control product quality per IATF 16949, implement EHS and safe production.
4. Cost & Team: Reduce production cost via process optimization, manage workshop team and performance appraisal.

-Job Requirements
1. Bachelor degree, major in mechanical or material forming (stamping).
2. 5+ years stamping management experience, 3+ years automotive continuous stamping management.
3. Familiar with APQP / PPAP, strong on-site problem-solving and data analysis ability.
4. Ability to work in a fast-paced, high-intensity manufacturing environment.
5. Logical thinking, adept at data-driven decision-making, and able to identify improvement opportunities through production reports such as DPU and equipment utilization rate.

Job Responsibilities
1. Assist in expanding overseas market business, develop and maintain overseas T1/T2 automotive customers, and maintain good customer relationships.
2. Follow up daily customer communication: inquiry reply, quotation, order follow-up, shipment coordination, after-sales communication, etc., familiar with basic foreign trade processes.
3. Assist in sorting customer data, arranging sample delivery and document submission, and follow up APQP & PPAP documents.
4. Collect overseas market information, customer needs and industry dynamics, and feed back to superiors timely.
5. Cooperate with R&D, production, quality, logistics and other departments to ensure order execution, independently communicate with customers and solve daily business problems.
6. Complete sales tasks assigned by superiors to help the team achieve performance targets.
-Job Requirements
1. Bachelor degree or above, major in international trade, business English, automobile, marketing is preferred.
2. More than 3 years of foreign trade or sales experience; automotive industry experience is preferred; willing-to-learn candidates without industry experience are also acceptable.
3. Understand basic foreign trade processes: inquiry, quotation, contract, shipment, customs declaration, logistics, etc.
4. Familiar with APQP and PPAP processes in the automotive industry is a plus.
5. Good English listening, speaking, reading and writing skills for daily email and oral communication.
6. Skilled in office software; strong cost accounting and data analysis capabilities are preferred.
7. Flexible thinking, good expression, strong sense of responsibility and execution.
8. Self-motivated, willing to learn and able to work under certain pressure.

Job Responsibilities
1. Be responsible for new mold review, trial molding, modification, pilot production and acceptance, and put forward professional technical evaluation and improvement suggestions.
2. Develop injection molding processes for new products and capable of independent DOE analysis.
3. Analyze production abnormalities, make professional judgments and implement improvements timely.
4. Promote process standardization and automated production to continuously reduce manufacturing costs.
5. Compile standard documents and guide workshop standardized operations.

-Job Requirements
1. Full-time junior college or above, major in injection molding, polymer, mold and related majors.
2. More than 5 years of working experience in precision plastic mold production such as switches and connectors is preferred.
3. Familiar with injection molding process principles, mold structure and product structure.
4. Rich experience in injection molding process design.
5. Proactive, well-organized with good communication and coordination skills.

Job Responsibilities
1. Design the appearance and internal structure of automotive combination switches.
2. Participate in new product review and structural optimization of existing products.
3. Output product technical documents, including key dimensions, BOM, product characteristic list and material selection; submit customer technical documents.
4. Compile product patents and complete product structure improvement.
5. Confirm technical status and provide support for derivative product development.
6. Lead product change plans and prepare relevant change documents.

-Job Requirements
1. Bachelor degree or above, major in mechanical automation and related fields.
2. Familiarity with IATF 16949 / VDA 6.3 / APQP product development is preferred.
3. Independent development and design experience in automotive parts is preferred.
4. Familiar with product development process and mold professional knowledge.
5. Master GD&T and tolerance analysis; proficient in 3D CAD / Pro-E / UG software.